slide.jpg

Parts & Materials

block-one.jpg

What's Included?

Installations Materials

Although we do make efforts to have inclusive pricing sometimes it’s necessary to use additional materials that must be charged for. Below is a list that outlines what parts and services come with your appliance installation, and what costs extra. If you have any questions or concerns please feel free to contact our team. Our techs have available for purchase, any additional materials that may be needed.

Laundry of any type or configuration

Included: Up to four feet of flexible aluminum dryer rated venting, two 4.5” gear clamps.
Not Included: Water supply hoses, hose splitters, hard dryer venting.

Standard Fridge / Range including slide

No materials included with this installation.

Water supplies Fridge / Ice maker

Included: 5’ steel braided line or Poly hookup (15’ Poly tubing & 2X ¼” compression nut, 2X ¼” compression insert, 2X ¼” plastic compression sleeve).
Not Included: second braided lines & Poly past 15’ connecting to other than existing valve.

Fridge full water supply line Simplified (Adapt-A-Valve)

Included:  QUICK CONTRACTORS STANDARD up to 25’ ¼” Polly tubing, 3/8” X 3/8” X 1/4” adapt a valve, direct run to nearest existing cold water 3/8” supply valve (typically under the kitchen sink)
Not included: supply runs beyond 25’, connecting to other than existing supply valve, SharkBite® or Pex® products of any kind

Fridge full water supply line with ½ Pex® supply & SharkBite® ¼” valve

Included: 5’ steel braided line, ½”X ¼” SharkBite® valve, SharkBite® Tee, ½”X½”½”, SharkBite® ½”X½” straight connector, up to 20’ ½” Pex® pipe.
Not included: second braided lines, additional SharkBite® connectors & valves, Pex® over 20’.

Dishwasher installations of any type

Included: 5’ steel braided line or up to 15’ Pex® tubing, standard or SharkBite®, 1 dishwasher supply adaptor, 1 SharkBite® 3/8mfp X ¼” push fit adaptor, up to 5’ of additional dishwasher drain tubing, up to 3 hose clamps, 1 electrical connector, and up to 4 marrettes of any size.

Not included: second braided lines and connectors, connecting to other than existing supply valve, additional dishwasher drain tubing beyond 5’, power supply cords, conversion of hard wiring to receptacle, time delay fuse set ups

Hood fans of any type including microwaves

Included: up to 3’ of foil venting of 6”, 8” or 10”,  any required mounting hardware not supplied by the manufacturer, electrical connector, up to 4 marrettes of any size.
Not included: moving of venting or electrical to accommodate installation, uncovering venting in the wall or ceiling, power supply cords, 110V electrical receptacle set ups.

Built in Microwaves with trim & Drawer Microwaves

Included: any additional hardware such as screws, washers, etc. that may be required.
Not included: correction of installation space, power supply cords, 110v receptacle set ups.

Cooktop/ranges both electric & gas

Included: ½” or ¾” 90-degree flex connector, up to 4 marrettes of ant size, 48” gas supply line & up to 3 black iron fittings/nipls
Not included: required junction boxes, power supply cords, conversion of amperage or voltage, addition of 110V receptacle, relocation of electrical supply

In-sink disposal

Included: electrical connector & up to 4 marrettes, power cord if needed, basic re-routing of kitchen sink drain from sink base to drain stack under same sink to accommodate disposal installation, connect/plug to existing electrical source and switch.
Not included: correction of existing non-satisfactory plumbing, running new electrical source, supply of 110V receptacle and/or switch.

Central vacuum full installation

Included: up to 30’ of 2” vacuum tubing, up to 10 pipe fittings (elbows/couplers etc.), up to 45’ of 18/2 wire, connection to up to 4 vac-drops, 2 vacuum faceplates.
Not included: vacuum tube over 30’, more that 10 fittings, more than 2 face plates, connection of more than 4 vac-drops, more than 45’ of 18/2 wire.

Central vacuum canister hang

Included: up to 6’ of 2” vacuum tubing, up to 4 pipe fittings (elbows/couplers etc.), up to 10’ of 18/2 wire, connection to up to 1 vac-drop, zero vacuum faceplates (faceplates can be purchased).
Not included: vacuum tube over 10’, more that 4 fittings, connection of more than 1 vac-drop, more than 45’ of 18/2 wire.

Water softener new installation

Included: soften entire home water system or installation to rough in space, up to 25’ of ¾” Pex® pipe, up to 6 SharkBite® fittings including softener adaptors, 15’ additional drain tube.
Not included: isolation of individual fixtures/hose bibs, more than 25’ of ¾” Pex®, more than 6 SharkBite® fittings, drain extensions over 15’.

Water softener remove & replace

Included: installation to existing rough in space, up to 10’ of ¾” Pex® pipe, up to 4 SharkBite® fittings including softener adaptors, 5’ additional drain tube.
Not included: isolation of individual fixtures/hose bibs, more than 10’ of ¾” Pex®, more than 4 SharkBite® fittings, drain extensions over 5’.

Toilet, new installation or remove & replace

Included: wobble wedges, installation onto existing water closet flange, connection to existing valve.
Not included: toilet water supply line, wax flange seal, tank mounting bolts/hardware, flange mounting bolts & hardware, replacement of damaged flanges, replacement of supply valve.

ALL JUST DONE PRICES INCLUDE INSTALLATION & LABOR

Get In Touch

Our mission at Just Done! is to provide a level of professionalism and service that not only meets, but even exceeds the expectations of both our customers and product manufacturers, all while striving to maintain a price that is fair for both us and our customers.


12017 160 Street
Edmonton AB
T5V 1G7


p: +1 (780) 707-4600

Call Us! +1 (780) 707-4600